DVR Health Monitor™ is an easy-to-use software/hardware combination that will monitor the status of TC/IP connected DVR’s and NVR’s. With it, at a glance, you can easily see that all connected DVR’s are functioning properly. The DVR Health Monitor™ email features gives quick and efficient notification to management or service personnel of any related issues.

Key Features & Benefits

• Automatically detects loss of video on analog or IP connected cameras, recording status, and alerts service personnel of any variance.
• Supports Email notification of alarms.
• Monitors CPU and DVR critical status.
• Interfaces with the Pelco matrix CM9740/60/70 series matrix switches for automated failover of connected DVR’s.
• Automatically re-routes connected inputs of failed DVR/NVR to monitor outputs and turns on hot swap redundant VIGIL DVR
• Monitor for ‘days storage’ minimum tolerance.
• Displays recording resolution, frame rate, software versions and other key information.
• Virtually unlimited VIGIL DVR/NVR servers can be monitored.
• Monitors and alerts potential hard drive failures.

Technical Specifications

Connectivity

• LAN/WAN: 10/100/1000 Ethernet card
• Connector (LAN/WAN): RJ-45

Hardware

• Windows 2000 / Windows XP
• Internal 80 GB Operation System
• DVDRW
• Pentium 4 up to 3.6Ghz, 512 MB RAM, 32 MB graphic card

Electrical

• Power source: 115-120 VAC; 50-60 Hz switch able, maximum 540W

Environmental

• (C) Rack Mount Case - Approx. weight: 11.5kg (25lbs)
• Operating temperature: 5ºC to 30ºC (41ºF to 86ºF) Relative humidity: Below 90%, non-condensing

Video Standards

• NTSC/ PAL

Warranty

• 3 years, 1 year for hard drives

Models

Case Style	Model
Commercial Case (C) Dimensions: 482mm (W) x 502mm (D) x 178mm (H) (19in x 19.75in x 7in)	VGL-HM-RK-200 19" rack mounted commercial case PC. Windows XP, 3.2HT CPU, DVDRW, VIGIL Health Monitor application installed.